To determine the Penn-Tech Cable Tensionmeter that will best serve your needs,
start with a list of the cables you'll need to measure. We recommend that you
do the research upfront: Be sure to choose the Tensionmeter that can handle the
full range of cable diameters you may encounter. The TM-1000 is the most
versatile Tensionmeter because it can be calibrated to measure cables ranging
from 3/16" to 1 1/8" in diameter.
Standard Calibrations
Our "off the shelf" Tensionmeters are calibrated in 500-pound increments
(ranging from 500 to 20,000 pounds) for galvanized extra high strength (EHS)
cables listed in the table below. We stock TM-1000s with two calibration
options: one calibrated to EHS only; the other calibrated to both the EHS and
galvanized bridge strand (BS) diameters listed.
| Model |
Cable |
3/16" |
1/4" |
5/16" |
3/8" |
7/16" |
1/2" |
9/16" |
5/8" |
11/16" |
3/4" |
13/16" |
7/8" |
15/16" |
1" |
| TM-600 |
7-Strand EHS |
|
|
X |
X |
X |
X |
X |
X |
|
|
|
|
|
|
| 19-Strand EHS |
|
|
|
|
|
|
X |
X |
|
|
|
|
|
|
| TM-700 |
7-Strand EHS |
X |
X |
X |
X |
X |
X |
X |
X |
|
|
|
|
|
|
| 19-Strand EHS |
|
|
|
|
|
|
X |
X |
|
|
|
|
|
|
| TM-800 |
7-Strand EHS |
X |
X |
X |
X |
X |
X |
X |
X |
|
|
|
|
|
|
| 19-Strand EHS |
|
|
|
|
|
|
X |
X |
|
X |
|
|
|
|
| TM-900 |
7-Strand EHS |
|
|
|
X |
X |
X |
X |
X |
|
|
|
|
|
|
| 19-Strand EHS |
|
|
|
|
|
|
X |
X |
|
X |
|
X |
|
|
| TM-1000 |
7-Strand EHS |
X |
X |
X |
X |
X |
X |
X |
X |
|
|
|
|
|
|
| 19-Strand EHS |
|
|
|
|
|
X |
X |
X |
X |
X |
|
X |
|
X |
| 19-Strand BS |
|
|
|
|
|
|
|
X |
X |
X |
X |
X |
X |
X |
Custom Calibrations
You can have your Tensionmeter calibrated to any cable if the cable's diameter
fits your Tensionmeter's diameter range.
Note: One
Tensionmeter can be calibrated for many different types and sizes of cable.
| Model |
TM-600 |
TM-700 |
TM-800 |
TM-900 |
TM-1000 |
| Diameter Capacity |
5/16" to 5/8" |
3/16" to 5/8" |
3/16" to 3/4" |
3/8" to 7/8" |
3/16" to 1-1/8" |
Contact us with a list of the cables you'll measure, specifying the
construction and diameter of each. If your cable isn't among the hundreds we
stock, we can calibrate a Tensionmeter to your 25-foot non-returnable sample.
(See a list of the most popular
types of cable we calibrate to.)
Custom Plotting
Tensionmeters are plotted in 500-pound increments ranging from 500 to 20,000
pounds. For an additional
charge, we can calibrate your Tensionmeter in
100-pound or 250-pound increments.
IMPORTANT
Be sure to have your Tensionmeter calibrated for the specific construction,
breaking strength, and diameter of the cable you're measuring.
Bridge strand cable and EHS (as well as other types) are commonly used in the
design of guyed tower structures, but their breaking strengths differ
significantly.
Contact us to order your Tensionmeter today!